3 and 5 hp 60Hz Submersible Turbine Pumps

Available with either 3 or 5 hp, the FE Petro high capacity pump delivers efficient, reliable and quiet performance when high volumes or high speed deliveries of gasoline or diesel fuel are required.

High Performance

FE Petro’s two-stage centrifugal pump is coupled with a dependable Franklin Electric motor to provide higher heads, faster fuel delivery and lower cost operation. Motors are all three-phase for smooth operation and are available in various voltages. Units come standard with a 6" diameter riser pipe to mount the pump to the tank.

Ease of Maintenance

If service is required, FE Petro products are designed to put the operator back in business fast. Maintenance on the pump motor assembly can be performed without having an electrician on site. Large diameter pins and sockets provide automatic open circuits and disconnecting of the wiring when the extractable portion of the pump is removed. Properly spaced lifting eyes facilitate the removal of the unit without disturbing the discharge piping. The pump motor assembly is easily removed from the discharge head by removing four bolts and using standard pusher bolts. Replacement pump motor assemblies are available for comparably sized competitive pumps.

Reliability

Quality engineering and simplicity of design work to ensure years of reliable performance from every high capacity unit. The continuous duty, three-phase Franklin Electric motor with carbon bearings and stainless steel journals is FE Petro’s standard. The impellers, made of molded acetal, and diffusers of hard coated aluminum, with a stainless steel pump shaft, assure trouble-free operation in motor fuels. Dual (180º opposed) 3" horizontal discharge ports provide easy installation, and two built-in line check valves reduce installation costs. Two line pressure relief valves protect the dispensers, meters and piping from abnormal pressures due to thermal expansion. The mesh screen on the pump inlet prevents large particles from entering the unit and the unit is compatible with existing high capacity leak detector technology. New units are easily connected to field wiring without disassembly.

Satisfaction

Each and every high capacity pump is built to your tank and bury specifications and the complete assembly is performance tested to ensure that your needs are met. All high capacity pumps are UL listed and meet the requirements of UL 79.

Power Requirements

  • High capacity pump models require three-phase, 60 Hz incoming power.
  • High capacity pump models are available as 208-230 VAC, 460 VAC or 575 VAC versions.
  • High capacity pump models are available in 3 hp and 5 hp versions.
  • STP-SCIII three-phase smart controllers and STP-CB3/5 three-phase control boxes are available for high capacity pump control.

Pump Motor

  • Fixed speed, 3450 rpm, multi-stage centrifugal type pump motor with built-in, automatic, thermal overload protection.
  • High capacity pump 60 Hz models are available as two-stage versions only.

Liquid Compatibility

  • Max. liquid viscosity: 70 SSU at 60 °F (15 °C).
  • Standard models are UL and cUL listed for fuel mixtures containing up to 10% ethanol and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
  • STPAG models are compatible with fuel mixtures containing up to 85% ethanol and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
  • HCP models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.
  • All wetted elastomers are made of a high grade, fluorocarbon compound.

Standard Features

  • Pressure relief valve: cartridge design available in two pressure relief settings, external to check valve. Standard model relieves at 40 psi and resets above 35 psi.
  • Syphon: external venturi-type syphon primer supplied as submersible accessory.
  • Air eliminator: every submersible includes tank return path to provide active air elimination.

Approvals

  • Consult factory for applicable approvals.

Quality Certification

  • Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.

High Capacity Turbine Pumps

Model

Description

STP3

3 hp 6" STP, three-phase 208-230 VAC

STP5

5 hp 6" STP, three-phase 208-230 VAC

STP5H*

5 hp 6" STP, three-phase 460 VAC

STP5G*

5 hp 6" STP, three-phase 575 VAC

  • *Please call customer service for lead time on this item.

Alcohol-Gasoline Units

Model

Description

STPAG3

3 hp AG 6" STP, 208-230 VAC

STPAG5

5 hp AG 6" STP, 208-230 VAC

STPAG5H*

5 hp AG 6" STP, 460 VAC

STPAG5G*

5 hp AG 6" STP, 575 VAC

  • *Please call customer service for lead time on this item.

Length Adder

Part Number

Description

401190911

Additional charge for pump lengths (A) from 132" to 170"

401190914

Additional charge for pump lengths (A) from 171" to 200"

  • Note: Model length (A) is defined on page 38. Model length (A) can be a minimum of 60" to a maximum of 200".

Factory Installed Options

Designation

Description

401165905

Syphon system (when purchased with STP)

401227001

Floating suction adapter, 3" male NPT (must be ordered with STP)

R

Model R relief valve factory installed, for Veeder-Root® PLLD

Field Installed Options

Model

Description

STP-CB3

3 hp, 208-230 VAC, 60 Hz, three-phase motor starter, 120 VAC coil

STP-CB5

5 hp, 208-230 VAC, 60 Hz, three-phase motor starter, 120 VAC coil

STP-CB5G

5 hp, 575 VAC, 60 Hz, three-phase motor starter, 120 VAC coil

STP-CBB5H

5 hp, 460 VAC, 60 Hz, three-phase motor starter, 220 VAC coil

STP-SCIII

Three-phase smart controller, 120 VAC coil (when ordered with a 6" high capacity STP)*

STP-SCIII

Three-phase smart controller, 120 VAC coil (when ordered without a 6" high capacity STP)

  • Note: Three-phase smart controller is compatible with FE Petro 208/230 Volt 3 and 5 hp high capacity STPs and like competitive makes. Not available for 460 or 575 Volt models.
  • *When purchasing STP-SCIII in equal quantities of fixed speed 6" STPs, the STP-SCIII will be invoiced at special discount pricing.

6" STP Extractable

(less manifold, riser and PMA)

Model

Description

HCPEXT-XXX

6" fixed length extractable

HCPAGEXT-XXX

AG compatible 6" fixed length extractable

 

High Capacity Submersible Turbine Pump Model Designation System

STP XXXXX Y - A - B

A typical turbine model designation has up to five components to define the pump being supplied as follows:

  • STP = Basic Model Designation
  • XXXXX = Factory Installed Options
  • HCP model designations may include one or more of the following characters in alphabetical order:
  • AG = Alcohol-gasoline compatible (85% ethanol or 100% biodiesel capable)
  • Note: Standard models 0% to 10% ethanol capable
  • F = Floating suction adapter (3" NPT male adapter)
  • *R = Model R check valve (24 psi relief/22 psi reset for PLLD). *Note: If not otherwise specified, all HCP models supplied with standard model check valve (40 psi relief/35 psi reset for MLD and TS-LS300).
  • Y = Pump Motor Horsepower/Electrical Rating
  • 3 = 3 hp fixed speed, 208-230 VAC
  • 5 = 5 hp fixed speed, 208-230 VAC
  • 5H = 5 hp fixed speed, 460 VAC
  • 5G = 5 hp fixed speed, 575 VAC
  • A = Model Length
  • Model length is expressed as three numeric characters that indicate the length of the HCP from the turbine manifold bottom to the pump motor inlet in inches, available from 60" to 200" (additional charge for models 132" and longer).
  • B = Riser Pipe Length
  • Riser pipe length is expressed as two numeric characters that indicate the total length of the riser in inches. Riser pipes are available from 6" to 60" in three inch increments (additional charge and lead time for risers 33" or longer).
Add Quotation